View 802_1203538.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

UTC 801/802
3/4 STRINGS Xmas LIGHT CONTROL
FEATURES
*Adjustable flash rate. *Programmable 2/3/4 strings of bulbs. *UTC 801 sequential mode for about 57 sec. 4 light string flash for about 3 sec. according to normal fosc. then back to sequential again. *UTC 802 sequential mode only.
INTEGRATED CIRCUIT
DIP-8
APPLICATION
*Xmas light controller, any AC control toys.
PIN CONFIGURATIONS
Vss
1
8
S4
X
2
7
S3
Y
3
6
S2
VDD
4
5
S1
ELECTRICAL CHARACTERISTICS (@VDD=3.6V unless otherwise specified)
PARAMETER
Operating Voltage Operating Current Quiescent Current Driving Current Oscillator Frequency Operating Temperature
SYMBOL
VDD IOP ISB IOH FOSC Temp.
TEST CONDITIONS
No load @VDS=1.2V External 30%, Rosc ~ 150k
MIN
0
TYP.
3.6 0.02 150 25
MAX
5 60
UNIT
V mA A mA Hz C
UTC
UNISONIC TECHNOLOGIES CO., LTD.
1
QW-R120-001,B
UTC 801/802
APPLICATION DIAGRAM
INTEGRATED CIRCUIT
Note 1: IC CHIP ~ 1.26 x 1.14 mm2, substrate to VDD Note 2: This specification is subject to be changed without prior notice.
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
UTC
UNISONIC TECHNOLOGIES CO., LTD.
2
QW-R120-001,B

▲Up To Search▲

Price & Availability of 802

	To Download 802 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .